Error C1041724 Mounting Exchange Server Database

techno3

Exchange Server databases’ transactions are temporarily stored in transaction log files. At times, you need to remove these files manually, usually when the disk runs out of space or the circular logging is disabled. If you come to such situations, it is recommended to determine that the logs have been committed to database or otherwise will cause problems. The database usually shows Dirty Shutdown state in such cases. However, the other reason for this is that database is corrupt. If it is, you should look for Exchange Recovery solutions.

You can take the following situation when you try to mount an Exchange Server database. In an attempt of mounting the database, you might receive an error as below:

An internal processing error has occurred. Try restarting the Exchange System Manager or the Microsoft Exchange Information Store service, or both.

ID no: c1041724
Exchange System Manager

The mount operation fails after you receive this error message.

Cause

Error c1041724 can be encountered if you have run eseutil /p repair utility on the affected database. At this point if Eseutil log files remain intact and are not removed, the database can fail to start with the above error.

Solution

To isolate the issue, you need to proceed as follows:

1.You need to first check if eseutil /p command was run. To do so, you should run eseutil /mh command for pub1.edb and priv1.edb and check the repair count value. If it is other than ‘0’, this shows that the command was run.
2.From the previous step, you also need to check for the database consistency. If it exists in Clean Shutdown state, which shows that the log files have been committed, you can safely remove the log files from Exchange Server folder, Mdbdata folder to a backup folder and mount the database.
3.If the database shows ‘Dirty Shutdown’ state, it may be because either all the log files have not been committed yet or the database is corrupt. You can wait for sometime to determine if uncommitted transactions is the case. If not, the database is corrupt that you need to restore from backup or by performing soft recovery.

In cases when database remains corrupted with no access to a suitable backup, you can use third-party Exchange Server Recovery utilities. These special applications allow safe extraction of user mailboxes without any modification to the original content. Exchange Recovery utilities provide you interactive design plus impressive features to experience.

Stellar Phoenix Mailbox Exchange Recovery is a complete tool that repairs Exchange database repair systematically. It is a safe and powerful Exchange Server Recovery tool that supports Exchange Server 5.5, 2000 and 2003. The tool can restore mailboxes in individual .pst files, which can be directly accessed in Outlook. The software is enriched with a realistic approach to repair corrupted EDB file in each instance.

General Concepts about Object-Oriented Programming

techno18

The programming style that we usually call object-oriented programming (OOP) has appeared relatively recently in the history of programming languages. This is a particular and very convenient style for many situations. It was designed to overcome the limits of structured programming based mainly on the widespread use of procedures, functions, pointers or other more or less developed data types.

Although structured programming is very practical for small software systems or reduced non-graphic applications, it should be avoided when dealing with large applications that use graphic elements where object-oriented programming is recommended. Object orientation means organizing software resources as a collection of distinct and discrete objects, which includes both data structures and their processing functions. This organization is an extension of structured programming in which the data structures and processing functions are only loosely connected. All items have their own identity and are perfectly distinct.

An object is defined as an abstract concept, a specific and useful element for any application. Objects serve two specific purposes:

– they provide a better understanding of the problem to be solved;

– they provide a base design for implementation.

A class of objects encapsulates a certain number of objects with similar properties. This similarity refers to both the description (data and attributes) and the behavior (functions or methods). Attributes are unique features within an object class. Each attribute receives a certain value which can be modified during the objects life cycle. Two or more objects can have the same or different values for the same attribute.

Methods or operations are processing functions applied to objects of a certain class. All objects within a class admit the same set of methods, methods which in return may receive any number of additional parameters. In order to apply various methods to an object, it has to be created (defined). Defining an object is called instantiation. Once an object has fulfilled its mission it is removed.

Abstraction is a fundamental human trait that allows us to build models and thus cope with complexity. In every field of human activity, project approach is based on building a model for a better understanding of the problem to solve. Software engineering makes no exception. Through abstraction the essential key aspects are isolated from the non-essential ones. Therefore, each problem might have several adequate models.

In the software engineering industry, structured programming has made a big step forward defining three perspectives needed in order to properly address any application. These perspectives, also known as models, are: the static model, the dynamic model and the functional model.

There are currently several object-oriented methodologies used for analysis, design and implementation of software resources. One of these modeling methodology is the OMT (Object Modeling Technique) methodology. This method of modeling involves the planning of the various development stages and a graphical representation of objects and their relationships.

OLAP Server to simplify the complicated business process

techno2

OLAP Server is multi-user, high-capacity data manipulation engine which is specially designed to support and operate multi-dimensional data storage. Design of the OLAP server and structure of the data are constructed in such a way that can retrieve rapid ad-hoc information. With the help of this server rapid and flexible calculation and transformation of raw data can be done. OLAP server is able to answer swiftly to the multidimensional queries. This server is the ideal combination of modern technology and time management.

Chief component of OLAP is OLAP server. This server acts as a bridge between the client and database management system or DBMS. This server can understand how data is organized in a certain database and acts specially to analyze these data. OLAP server is now available for all type of major database system. Olap server was primarily used in 1970 but then it was not called as OLAP server. Then in 1995 Edgar F Cod, father of relational database gave it the very name OLAP server. From there on OLAP server or Online Analytical Processing Server starts its journey.

OLAP Server is indeed an intelligent business software tool. Application of OLAP is seen widely in business management, business reporting, business process management, marketing, budgeting, forecasting, financial reporting and some other complicated wings related to a business process. Output of OLAP is exhibited in matrix and pivot format. Rows and columns found in matrix are woven with dimension. On the other hand values of matrix are formed by measures. Work of OLAP depends on the OLAP cubes or hyper cubes or multidimensional cubes. In OLAP system by the word measures we mean some numeric facts. These types of numeric facts are generally derived from snowflake or star schema of tables. Measures can be categorized with the help of dimensions which are taken from dimension tables.

To have this revolutionary service of OLAP server, you can take the help of online service provider. For this you have to fill an online form with your personal details, nature of your business and also with your contact number. If you want to gather more details you can take the help of the internet.

About the Author

Carlos Quijada is an IT professional associated with the field since the last 20 years. His core area of specialization is programming. Besides working with one of the leading IT services, he writes about technology and its benefits.For more information you can visit OLAP Servers and OLAP.

Importance Of Web Server Log File Analysis

techno15

A log file is a file that stores all the actions in an order that occurred with a server, a device, an application. Log file is like a black box in an aircraft, but only difference is that log files can be used to save a crash of a server by getting the details of actions on a server or software in advance. A log file that is accurately analyzed can avoid the misuse of the servers and even can easily ascertain the malfunctioning too.

Since these log files have special characters, session, database information segregating this information to get the data required format manually is very difficult. Myloganalyzer designed with the advanced pattern matching capabilities to easily and accurately do this on an EXIM format log file used in Mail servers. Anyone can use this service, as no technical knowledge is required as such, only a basic knowledge to upload the log files to get the desired report.

Myloganalyzer uses the mail server log files to get the IP address of the sender and receiver of the mails, the hostnames used by users to send and receive mails incase found anything wrong with the hostname and IP the user can modify the filters of the Mail Servers. Reports are available on the mail counts, the protocols that are used by the user like smtp, esmtp, esmtps, smtps, esmtpa, local, the mail id of the sender and receiver. Mail server log files are analyzed to give the highest sender and receiver of emails and also to find out the user exceeding the highest mail limit. Most important of all the details of spammers who have used the mail server, also has the facility to view the filtered mails.

All the above reports can be got for the time period specified from years, months or a specific date or even for the days of a week, hours of a day. So this is the most important and flexible facility used in Myloganallyzer to pin point on the details recorded in a log file.

Once your log file is uploaded Myloganalyzer can literally do a dissection of your mail servers log file effectively and accurately to get the reports you need. So as to maintain the mail server spam free and easily accessible to the expectation of your users this service can be useful.

Keep Those Back Injuries At Bay With The Sl500 Server Lift

techno2

Around, 80% of the injuries in the workplace are back injuries due to heavy lifting. This can be more common in a data centre, as the majority of rack mount equipment, like servers are extremely heavy items of equipment. In order to reduce the likelihood that injuries would occur, the use of a server lift can be incorporated into your work environment.

Like any piece of equipment on the market, there are a lot of choices, so choosing the correct piece of equipment is vital to the smooth running of your company. Many of the data centres where we work tend to be rather cramped and the areas between the server racks can be quite narrow. The SL500 server lift has a great advantage over its competitors as the footprint of the machine is really small. The SL500 server lift width is just 24 inches, so manoeuvring through slim isles is made a lot easier with this equipment.

An important factor when choosing a new server lift is to make sure it meets the current OSHA (Occupational Safety and Health Administration) guidelines that are set out. The SL500 server lift meets and in some cases, exceeds those guidelines. This can not only assist you in making sure that your workplace is as safe as possible but if used properly, it is highly unlikely that any accidents are going to occur.

As far as the weight that the SL500 server lifter is able to handle, the maximum is 500 pounds. So what about the height it can lift to, the SL500 server lift can lift equipment to a height of 8 feet, making it very convenient to lift equipment to the higher levels in your racks. In addition, you can also lift other items such as heavy batteries and with the included strap handles, remove items safely from a box with the use of this server lift.

The controls that operate the SL500 server lift are not only easy to understand and use, but extremely easy to manoeuvre heavy equipment very precisely in to and out of your racks. The brake/stabilizer locking system helps to keep the server lift in place while you are positioning the equipment.. The onboard controls supply you with the ability to manoeuvre any item into very small places, so that the server or any other hardware can be slid into the rack conveniently.

Selecting the right server lift can not only help you to make sure that your working environment is safe, when you choose the SL500, you’re also giving yourself an efficient piece of equipment that your entire workforce will appreciate.

The SL500 is definitely a piece of equipment to think about as it ticks the right boxes and gets the job done.

Dedicated server web hosting- make the right choice

techno17

Having a server is something which many people dream about. Unfortunately, very few of them manage to provide themselves with dedicated server web hosting. Nobody knows that the reason for that is. Perhaps, it is because most of the people think that the dedicated web server hosting always involves a lot of money and expenses.

Having a server is something which many people dream about. Unfortunately, very few of them manage to provide themselves with dedicated server web hosting. Nobody knows that the reason for that is. Perhaps, it is because most of the people think that the dedicated web server hosting always involves a lot of money and expenses. However, we can completely argue that statement since being provided with good-quality web hosting is something which everyone deserves and everyone can achieve.

Of course, it is sometimes quite difficult to choose among all these server web hosting offers on the Internet. The truth is that everybody promises that their server is the best, the most preferred one but in reality- things are quite different. Basically, it is the main reason why people feel so confused when it comes to choosing dedicated server web hosting.

Undoubtedly, one of the peoples main problems is that they have no idea how much the dedicated web server hosting is supposed to cost. The lack of such important information is the real reason why there are so many people making the wrong decision. So, the question about the cost of the web hosting is going to be answered right now! Basically, the so called dedicated server web hosting costs between $49 and $100. There might be some offers which are out of this range but it could be claimed that 90% of the web hosting proposals offer a cost between $50 and $100.

What can we claim about the offers in this diapason? Well, there is no doubt that those are the offers which people should count most on! Why is that? It is because the price between $50 and $100 is completely normal for web hosting services. However, if you are offered to pay below $50, you can really doubt that these are cheaters- they will either take your money and never respond again or will offer web hosting services of extremely high-quality! But people who are offering web hosting services above $100 are very likely to be cheaters also. What they might be promising is web hosting of extremely high quality but what you may receive instead is nothing!

Searching for Reliable Data Server management services

techno7

Everyday there is increasing number of IT Company in both developing and developed countries. Server Management Services is a freelancing solution that controls the everyday functions of web servers, keeps companies current with technology and best methods, and decreases expenses. This set of services standardizes server functions, provides the employees and skills to help your web servers run effectively, and helps you to save your business money. A dedicated server gives you a far higher amount of server space to use – the entire machine, in fact – and is a great choice for high-volume sites that need continuous attention. You can use this kind of web page hosting and get handled assistance, where your host company provides complete or limited assistance for your server, or unmanaged. Often, you will have complete main access to set up whatever you will require on you devoted server and the company will handle everything up to the application part.

The company environment is never stand still and this demands companies to constantly scale up and mange their IT features. IT Company requires careful planning and control of data centers, data source, remote features control, features, protection solutions and problem solving company networks. In any network system whether you opt for dedicated or Virtual System Server management services play very inevitable role. Server management System help to improve usage of IT features, maintain IT service a continual, minimize protection risks and, considerably bring down the features expenses as well.

Essential Benefits of Server Management and Tracking Services –

Experienced program and system experts available around the clock Slot server monitoring solutions for standard audience like SMTP, POP3, HTTP, and many more Wireless router, change, firewall program, VPN, fill balancer and other crucial facilities monitoring Usage pattern research for system slots and program functions Unix, Linux Windows -working system-specific traps Enhance Business Growth Better Operability results into sustainably.

Assisting pc users can take a substantial amount out of an IT squad’s time. That is why many businesses are turning to Xerox-and finding that their costs and threats are reduced, and their skilled internal technical employees are free of routine, time-consuming projects.. While selecting reliable network management that will improve and enhance your overall IT Database of any firm. At international level, achieve allows you to take advantage of the large number of experienced IT experts in all sides of the world. There are many network services that provide unique network services for management services which ensures access anywhere and everywhere with secured encryption. While Desktop management services are deliberate to raise your standards for End-User Environment and Utilized your IT Resource.

Introduction To 70-483, Microsoft Programming In C#

techno20

Microsoft being one of the most well-known organizations when it comes to software development and database development gives you the opportunity to add their name and standard to your resume through the 70-483, Microsoft Programming in C# certification program. The 70-483, Microsoft Programming in C# certification program offers the candidates to become an expert in the field of Database Development.

The 70-483, Microsoft Programming in C# certification program is one of the most advanced certification programs in the field of Information Technology, and it not only gives the individuals a complete knowledge of C#, it also tends to make them an expert in Microsoft Programming. For all those individuals directly or indirectly related to the Information Technology, the 70-483, Microsoft Programming in C# certification program is a landmark and all those candidates who are already working as a Microsoft Programmer, the 70-483, Microsoft Programming in C# certification program will only make things much more easier and all their problems will begin to solve within no time.

Pre-requisites for 70-483, Microsoft Programming in C#:

For the candidates applying for the 70-483, Microsoft Programming in C# certification program, there is no hard and fast rule to have some prior experience in the specific field. All the candidates need will be to have some knowledge of working with different softwares and a little bit they should know about database management, which will only make it easier for them to pass the 70-483, Microsoft Programming in C# certification program. Once you get to know about the 70-483, Microsoft Programming in C# certification program, you will know automatically how a little prior knowledge of databases and database management in different forms can come in handy. Having a little bit of on hand experience relevant to Programming in C# can also be of very high importance while passing the test, still none of these things is essential, you can pass the test without them as well.

How to pass the 70-483, Microsoft Programming in C# certification?

First things first, that would be to take a good look at the 70-483, Microsoft Programming in C# certification program course outline that is easily available at any institution where this course is being offered. There are many online websites that are offering this course as well and you can easily find the relevant material online to easily pass the test.

Article IT Outsourcing, Dedicated Server Hosting, Data Center, Colocation

techno15

IT Outsourcing is team of young IT professionals dealing with problem occurring in computers and related products. These IT guys take the calls form customer and provide them solutions for there problem. There major work includes finding the problem, analyzing the causes and finally eliminating them for smooth running of applications. Almost every corporate engaging these young IT guys to work for them as outsourcing agents to promote the customer relations. With tough competition it is important for every company to have harmonious relation with there customers and it possible only if they able to provide best services to there customers. With outsourcing help desk the companies get benefited as they need not worry about the customers query and focused on business on the other hand customer will never feel cheated as they get best services from professional people. This concept of Colocation is that placement of several entities can in a single location.

Companies have many benefits from Dedicated Server Hosting services as it helps in improving operations of the company. Although every company has Data Center and have two option either they can arrange in-house help desk services or appoint third party company as there outsourcing service executive. Rendering services to Third Party Company will let the business to save cost of business and they get potential and professional help desk service providers who will effectively handle help desk tasks. Moreover help desk service provider will provide immediate and critical measure to any issue. Companies are dealing with many internal and external threats and therefore appointing outsourcing help desk provider companies able to shift burden of external threats on Third Party Company. Outsourcing help desk services act as supportive system to any business concern so that entrepreneur concentrate in developing internal processes for future growth. Outsourcing help desk services are feasible option to deal with unknown contingencies of business enterprise.

The Article is written by artmotion.eu providing Dedicated Server Hosting and Colocation. Visit for more information on artmotion.eu Products & Services___________________________Copyright information This article is free for reproduction but must be reproduced in its entirety, including live links & this copyright statement must be included. Visit artmotion.eu for more services!

Solve Task – Microsoft Exchange Server Reported Error (0x8004011b) Error

techno20

Among other reasons, one of the most common reasons that can prevent an Outlook user from sending and receiving e-mails is Exchange Server database corruption. In such circumstances, the Exchange administrator should immediately restore the database from last available backup, failing which raise the requirements of using suitable Exchange Server Recovery utilities.

For better illustration, consider a case of a Microsoft Outlook user who tries to send or receive an e-mail message and Outlook is configured to use Microsoft Exchange Server. When he/she tries to do so, one of the below mentioned error messages is received:

Task ‘Microsoft Exchange Server’ reported error (0x8004011B): ‘Unknown error 0x8004011B

As a result of this error message, Outlook user can no longer send or receive more e-mails.

Explanation

The above issue is most likely to occur in any of the following situations:

1.You have installed Microsoft Outlook 2003 on Exchange 2003 Server or domain controller
2.Microsoft Outlook profile is damaged
3.An antivirus software or firewall is running that has prevented the connection of Microsoft Outlook and Microsoft Exchange Server
4.Corrupted Exchange Server database

User Action

If you encounter the stated problem, you should consider implementing the following measures:

1.Modify the security settings if Microsoft Outlook 2003 installation in Exchange 2003 Server or domain controller is the issue. For this, change the security settings from ‘log on network security’ to ‘Kerberos’.
2.If Outlook profile is corrupted, you can recreate the profile and delete the affected one
3.You should check the compatibility of your antivirus software with Microsoft Outlook 2003 and Microsoft Exchange Server 2003. Also, you can disable all antivirus programs running at server and client ends. In case of firewall issues, you might need to enable static port mapping.
4.In case of Exchange database corruption problem, run Eseutil and Isinteg utilities after taking a complete backup. If this doesn’t help, you need to use a third-party Exchange Recovery Tool. Running an Exchange Server Recovery software can help you extract database content in a readable format.

Stellar Phoenix Mailbox Exchange Recovery is a comprehensive exchange database recovery utility designed to repair corrupted Exchange database and restore its mailboxes as individual *.pst files. This Exchange Recovery tool supports MS Exchange Server 2007, 2003, 2000, and 5.5 and is also competent in restoring deleted mailboxes. The tool is compatible with Windows 7, Vista, XP, 2003, and 2000.